Rinse aid compartment 4. Detergent compartment lid 5. Rinse aid compartment lid Customer Care Center www. Page Economic Dishwashing Economic dishwashing Run programs only with a full load Wait until the dishwasher is fully loaded before running a program, this way you save energy. Page Fragile Dishes Fragile dishes Some cookware is not dishwasher safe. This can be for several reasons.
Some materials cannot withstand high temperatures, others can be damaged by dishwasher detergent. Fragile decoration Porcelain with decoration on top of the glazing the items feel rough should not be washed in a dishwasher. Page Dishwashing Dishwashing Below are step-by-step instructions to help you Cutlery basket achieve the best possible dishwashing results. Place cutlery with the handles facing down, except Load the baskets correctly for knives, and spread them out as much as possible.
Ensure that spoons do not stack inside each other. Do not rinse dishes under running water before The cutlery basket is placed in the lower basket. Page 13 Dishwashing a while. Liquid hand-washing acid or commercially available dishwasher cleaner in detergent must not be used as the foam that forms the detergent compartment with no dishes in the prevents the dishwasher from operating effectively. Page Select The Program Dishwashing Press the main power switch Normal wash and close the door Use to wash normally soiled dishes, and even dishes with dried leftovers, such as plates, serving dishes, Select the program cups, glasses, and so on.
Press the Program selector one or more times Eco wash until the desired program symbol lights. Page Select Options Dishwashing Select options Delayed start To select an option, press one of the option When you select Delayed start, the dishwasher will buttons. Page After Dishwashing Dishwashing If the dishwasher is turned off using the After dishwashing main power switch or due to a power Once the program has finished, "End" appears failure on the display.
If the program was not finished, the interrupted A buzzer also sounds at the end of the program. See program resumes when power is restored.
Page Settings Settings Do as follows to open the settings menu: Turn off the dishwasher using the main power switch. Wait about five seconds. Then press the main power switch again. Wait until the numbers appear in the right-hand display before continuing to the next step.
Page 19 Settings Button Options Settings Description press Off Buzzer volume The dishwasher uses a buzzer to indicate when a program is finished or when a fault Low has occurred. Off Operation volume This sound is used to confirm each button Page Time Remaining Time remaining Once you have selected a program and options, the display indicates how long the program took the last time it was used. Once you have started the dishwasher, the display indicates how much program time remains.
The remaining time is updated after the water for the final rinse has been heated. Page Coarse Filter Care and maintenance instructions The dishwasher tub is made of stainless steel and is 1. Turn the handle counterclockwise once. However, if you have hard water, limescale deposits may form in the dishwasher.
If this happens, run the Heavy wash program with high temperature and two tablespoons of citric acid or commercially available dishwasher cleaner in the detergent compartment with no dishes The pump can be accessed from inside the Do not forget to reinstall the drain pump access dishwasher. Cut the power to the dishwasher by unplugging the unit from the power outlet.
Page 23 Care and maintenance instructions Door When cleaning the edge around the door, use only a slightly damp cloth with a little cleaner if necessary. Do not use a spray bottle or the like around the door lock. This is to ensure that water does not penetrate the door catch and come into contact with the electrical components. Page Rinse Aid Rinse aid Select dosage The rinse aid dispenser can be adjusted between 0 Drying is faster if you use rinse aid.
When the rinse off and 6. Water outlet fault See "Possible causes" in the chapter Trou- bleshooting. Water inlet fault Check that the water supply valve is on. Inlet valve leakage Turn off the water supply valve and call the Customer Care Center Turn off the machine with the main power switch and then turn it on again to clear the error message from the display. The spray arms do not rotate. Remove the arms and clean them. Check that the dishes are not blocking the spray arms.
Detergent is too old. Detergent is a Avoid large packages. You have forgotten to turn on the main Pressing the main power switch. The door is not properly closed. The plug is not plugged into the power Check. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open.
Check that the detergent compartment is empty after completion of the wash cycle. A child safety lock is fitted to prevent children from opening the dishwasher door.
To activate the child safety lock, press in the door latch and use a screwdriver to turn the screw slot top lefthand corner to a vertical position. To open the door, you must press the white plastic catch illustrated below to the left while pressing the door latch up. Reset by turning the screw slot back to a horizontal position. You can activate the child lock button lock to prevent children from starting the dishwasher see the section Settings.
The overflow protection starts pumping out the machine and turns off the water supply if the water level in the dishwasher exceeds the normal level.
If the overflow protection is triggered, turn off the water supply and call the service division. When cleaning the edge around the door, use only a slightly damp cloth. Do not spray water around the edge! Moisture can make its way into the lock, which contains electrical components. Pull out the power cable and cut it as short as possible. Contact the local water utility to check the water hardness in your area.
This is important with regard to how much detergent and rinse aid to use. By using rinse aid you will improve your drying result. You will also achieve a better dishwashing result with glassware and dishes. Only add rinse aid to the level marked max. The section Settings describes how to set the rinse aid dosage. Rinse aid dispensing can be set from Off to High dose. Factory settings:. If you have very soft water, the rinse aid can be diluted with water. Wait to run a program until the dishwasher is full.
This way you save energy. If the dishes are only slightly dirty, you can select a lower temperature with certain programs. See also the section Selecting Options in the chapter Using the dishwasher. To save energy, use Short dry. The drying result will be better if, once the program is finished, you leave the door slightly open. If you use district heating, solar power or geothermal power to heat your home. Choosing a hot water connection cuts program times and reduces the dishwasher's electricity consumption.
Some cookware is not dishwasher safe. This can be for several reasons. Some materials cannot withstand strong heat, others can be damaged by dishwashing detergent. Porcelain with decoration on top of the glazing the items feel rough should not be washed in a dishwasher. Place items so that they do not touch each other during the wash. Use a short program with the lowest possible wash temperature. Select Short dry. Delicate and very fragile items should not be washed in a dishwasher.
Glassware washed in a dishwasher at high temperatures can gradually develop a grey film that cannot be removed. Wash fine glassware at a low temperature and with a small amount of detergent. Silver and stainless steel items should not come into contact, as the silver can become discoloured. Some types of glue are not dishwasher safe. In such cases, the handles may loosen. Aluminium can lose its shine if washed in a dishwasher. However, good quality aluminium pans can be washed in a dishwasher, even if some of the shine will be lost.
The dishwasher is equipped with a top cutlery tray, an upper basket and a lower basket with cutlery basket. The top cutlery tray has space for cutlery, ladles, whisks, serving cutlery and similar items.
Place glasses, cups, bowls, side plates and saucers in the upper basket. All dirty surfaces should face inwards and downwards! Wine glasses are placed on the wine glass shelf and knives are placed in the knife stand on the right if fitted. Place plates, side plates, serving dishes, pots and cutlery in the cutlery basket in the lower basket.
Move the foldable tines and their mounts to widen the distance between the tine rows to adapt the lower basket to plates with a diameter greater than 25 cm.
Place cutlery with the handles facing down, except for knives, and spread them out as much as possible. Ensure that spoons do not stack inside each other. The cutlery basket has a fold-down section in the middle for small items, or small shafts, such as electric whisk attachments. The cutlery basket lid can be removed and used, for example, as an extra cutlery basket in the upper basket see below.
Too much detergent can result in less effective dishwashing and also entails greater environmental impact. Add the detergent to the detergent compartment. There is a compartment for the prewash and one for the main wash. If powder and liquid dishwasher detergents are used, add a small amount of the detergent to the prewash compartment.
Contact the detergent manufacturer if you have any questions about the detergent. Use only dishwasher detergent! Washing up liquid must not be used as the foam that forms prevents the dishwasher from operating effectively.
Halve the tablet if it is difficult to close the dispenser lid. There is a risk that the detergent will not be released properly if the lid is tight and will not open correctly.
Dishwasher tablets are not recommended for short programs less than 75 minutes. Use powder or liquid dishwasher detergent instead. Read through the directions for these products carefully. If anything is unclear, contact the detergent manufacturer. Press the Program selector one or more times until the desired program symbol lights.
A program suitable for day-to-day dishwashing. This program can also clean dried leftovers, but is not intended for burnt food, such as on oven dishes. Program for very dirty dishes, such as pans, casserole dishes and oven dishes.
If these dishes do not completely fill the dishwasher, you can add plates and the like. Use to wash normally dirty dishes, such as plates, serving dishes, cups, glasses and so on. For washing normally soiled mixed loads, with the best energy and water performance, use the Normal program ; low temperature, short drying no options.
This causes a slight increase in energy consumption. The High temperature option must be selected to access the program used to compile the information for energy labelling. The program adapts to the specified running time or finish time. With this program it is important to choose a time suited to how dirty the dishes are.
To select an option, press one of the option buttons. The field next to the button lights when the option is activated. The available options depend on the selected program. Once you have started the program, the options you selected are saved for the next time you use the same program. An exception is the Delayed start option.
Press the option button several times — or hold it in — to set the desired program time for Time program. You can choose a program time between 30 minutes and 3 hours. Activate this option for improved dishwashing results. The machine then uses a higher temperature for the main wash. This option cannot be activated if the Time saver option is selected. If you want to use the lower temperature, press until the field next to the button turns off.
The higher temperature in the final rinse and longer drying improves the drying result if you activate the Long dry option. This option can be used with all programs except Time program. If you want a program with Short dry, press so that the field next to the button turns off. This option shortens the program time, but uses more energy and water. This option can be selected with Daily wash, Heavy wash or Normal program. Press the button several times — or hold it in — to set the desired number of hours.
This indicates that the program has started. Close the door properly, otherwise the dishwasher will. The display indicates if the door is open. If the machine does not start within 2 minutes of the last button press, the display returns to showing the last program run.
Once you have selected a program and options, the display indicates how long the program took the last time it was used. Once you have started the dishwasher, the display indicates how much program time remains.
The remaining time is updated after the water for the final rinse has been heated. This may differ somewhat from time to time depending on the temperature of the water supply, the amount of dishes, the ambient temperature and other factors.
The time counts down while the program is running and the remainder of the program is displayed. The remaining time is displayed e.
0コメント